| |
Building Construction Technology |
| |
-
BCT 208 - Framing/Roofing Lec. 3 Lab. 0 Cr. 3
This course covers the principles and hands-on experience in constructing framing and roof structures.
|
| |
-
BCT 209 - Construction Project Management Lec. 3 Lab. 0 Cr. 3
This is a course designed with projects using building construction skills.
|
| |
-
BCT 210 - Interior/Exterior Installations Lec. 3 Lab. 0 Cr. 3
This course covers the installation of materials used in siding and wall covering. Techniques are presented by hands-on activities in siding, paneling, drywall, and alternative materials used in a green construction environment.
|
| |
-
BCT 221 - Construction Building Codes Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): RDG 100 or Instructor Approval.
This course is a study of local, state, and national building code requirements as they apply to residential and commercial construction.
|
| |
-
BCT 224 - Building Materials Lec. 3 Lab. 0 Cr. 3
Residential building materials are discussed and studied. The appropriate uses of sawn lumber and engineered lumber for strength are included in the course work. The selection of veneer and sheathing products are reviewed.
|
| |
-
BCT 230 - Bidding/Contracts/Specifications Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): RDG 100 or Instructor Approval.
Course includes: Procedures for project cost control and systematic methods of handling changes, claims, and disputes for both general and subcontracting. Construction accounting and administrative issues associated with the job performance are covered. A practical approach to legal issues is emphasized.
|
| |
-
BCT 240 - Green Residential Construction Overview Lec. 3 Lab. 0 Cr. 3
This course is a study of the techniques and methods of construction and methods of residential projects. This course includes the interactions between carpenters, plumbers, and electricians.
|
| |
-
BCT 241 - Green Materials Lec. 3 Lab. 0 Cr. 3
This course will cover the management of materials on a residential construction project. The course will also include the selection of materials for recycled content and low volatile organic content. Indoor air quality issues arising from construction and building commissioning are discussed.
|
| |
-
BCT 242 - Insulations Lec. 3 Lab. 0 Cr. 3
This course will address the alternatives available in insulation selection as well as installation techniques. The concepts of heat flow will be discussed. An overview of alternative construction techniques such as Passive Houses will be discussed as well as strategies for adapting the techniques for residential construction in the southeast.
|
| |
-
BCT 243 - Energy Efficiency & Weatherization Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): BCT 105 or instructor approval.
This course is an overview of the alternatives available in high efficiency mechanical systems for existing residential structures. Included are strategies for increasing building envelope effectiveness. Envelope testing and energy auditing techniques are used.
|
| |
-
BCT 244 - Site Layout / Foundation Types Lec. 3 Lab. 0 Cr. 3
The course covers the layout of building corners and elevations. Appropriate tools are used in the training. The class covers site selection criteria and optimal building locations to control passive energy sources. A survey of foundation types and the study of construction techniques are included.
|
| |
-
BCT 245 - Green Plumbing Concepts Lec. 3 Lab. 0 Cr. 3
This course covers the basic design of plumbing a residential structure through the deployment and implementation of green construction elements. It also exposes the student to water recover systems, rainwater recover systems, and gray water systems in a residential setting.
|
| |
-
BCT 250 - Environmental Resistant Construction Codes Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): RDG 100 or Instructor Approval.
This course emphasizes the use of prescriptive design techniques for minimizing damage to buildings from environmental hazards. Prescriptive design tools to handle the issues of flooding, high wind, and earthquake hazards are studied.
|
| |
-
BCT 255 - Construction Internship Lec. 3 Lab. 3 Cr. 3
This course is designed to provide job success skills and on the job work experience in the field of construction. This course will include 40 hours of on-the-job work experience. This course will substitute for either BCT 230 or BCT 250 .
|
Biology |
| |
-
BIO 101 - Biological Science I Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): ENG 100 , MAT 102 , RDG 100 .
This course is a study of the scientific method, basic biochemistry, cell structure and function, cell physiology, cell reproduction and development, Mendelian genetics, population genetics, natural selection, evolution, and ecology.
|
| |
-
BIO 102 - Biological Science II Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): BIO 101 .
This course is a study of the classification of organisms and structural and functional considerations of all kingdoms (particularly major phyla as well as viruses). Vertebrate animals and vascular plants are emphasized.
|
| |
-
BIO 112 - Basic Anatomy and Physiology Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): ENG 100 , RDG 100 .
Prerequisite/Corequisite: MAT 102 or MAT 155 .
This course is a basic integrated study of the structure and function of the human body. Laboratories compliment the material presented in lecture.
|
| |
-
BIO 125 - Biotechnology Explorations Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): BIO 101 , ENG 100 , MAT 102 , RDG 100 .
This course provides an overview of biotechnology. The course will explore the following areas of biotechnology: genomics, proteomics, and bioinformatics; the search for and use of extremophiles in biotechnology; biopharmaceuticals; agricultural biotechnology, DNA, forensics, and tissue engineering.
|
| |
-
BIO 210 - Anatomy and Physiology I Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): ENG 100 , MAT 102 , or MAT 155 , RDG 100 .
Prerequisite/Corequisite: One of the following: BIO 102 , BIO 112 or CHM 105 .
This is the first in a sequence of courses, including an intensive coverage of the body as an integrated whole. All body systems are studied.
|
| |
-
BIO 211 - Anatomy and Physiology II Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): BIO 210 .
This is a continuation of a sequence of courses, including intensive coverage of the body as an integrated whole. All body systems are studied.
|
| |
-
BIO 225 - Microbiology Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): BIO 210 .
This is a detailed study of microbiology as it relates to infection and the disease processes of the body. Topics include immunity, epidemiology, medically important microorganisms, and diagnostic procedures for identification.
|
| |
-
BIO 238 - Musculoskeletal System Anatomy Lec. 2 Lab. 3 Cr. 3
Prerequisite(s): BIO 112 .
Corequisite(s): MTH 122 , MTH 123 , MTH 126
This course is a continuation of BIO 112 and is designed for the massage therapy student. It emphasizes the muscular and skeletal systems with laboratory exercises on the bones, bone markings, and the muscles addressing their origin, insertion, innervations and action.
|
Biomedical Technology |
| |
-
BMT 220 - Bio-Instrumentation I Lec. 4 Lab. 0 Cr. 4
Prerequisite(s): EEM 117 , EEM 201 , EEM 231 , EEM 241 , EEM 243 , RDG 100 or instructor approval.
Corequisite(s): EEM 244 , IST 162 , IST 163 , IST 164 , IST 166 , RDG 100 .
This course covers cardiovascular measurements, blood pressure measurement, measurements of heart sound, measurement of physical variable, and characteristics of the various analog-to-digital and digital-to-analog techniques.
|
| |
-
BMT 230 - Bio-Instrumentation II Lec. 4 Lab. 0 Cr. 4
Prerequisite(s): BMT 220 .
Corequisite(s): EEM 244 , IST 162 , IST 163 , IST 164 , IST 166 , RDG 100 or instructor approval.
This course covers techniques involved in biophysical parameter measurements, electrical safety and troubleshooting methods and general biomedical equipment.
|
| |
-
BMT 233 - Medical Equipment and Repair Lec. 3 Lab. 0 Cr. 3
Corequisite(s): EEM 244 , IST 162 , IST 163 , IST 164 , IST 166 , RDG 100 or instructor approval.
This course covers the application of the performance analyzer, tester, and simulator for troubleshooting and calibration of medical equipment.
|
| |
-
BMT 235 - Cooperative/Internship in Biomedical Equipment Repair Lec. 1 Lab. 6 Cr. 3
Prerequisite(s): EEM 244 , IST 162 , IST 163 , RDG 100 or instructor approval.
Corequisite(s): BMT 220 , BMT 230 , BMT 233 .
The cooperative/internship is designed to provide job success skills and on the job work experience in local biomedical/ electronics industries. The course emphasizes time management and problem resolution in biomedical equipment repair environment.
|
Biotechnology |
| |
-
BTN 103 - Introduction to Biotechnology and Laboratory Rotation I Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): BIO 101 , ENG 100 , MAT 102 , RDG 100 or instructor approval.
This course provides an overview of biotechnology, which prepares individuals for working in medical, research, industrial, and law enforcement forensic laboratories. Course content includes theory, application, and basic laboratory skills.
|
| |
-
BTN 104 - Biotechnology Laboratory Rotation II Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): BTN 103 , ENG 100 , MAT 102 , RDG 100 .
This course is a study of cell culture techniques with laboratory emphasis on the principles and practices of initiation, cultivation, maintenance, and preservation of both animal and plant cell cultures.
|
Business |
| |
-
BUS 101 - Introduction to Business Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): ENG 100 , RDG 100 , BUS 140 or MAT 102 .
This course is a study of the nature of business activity in relation to the economic society, including how a business is owned, organized, managed, marketed and controlled.
|
| |
-
BUS 110 - Entrepreneurship Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): BUS 101 .
This course is an introduction to the process of starting a small business, including forms of ownership and management, business feasibility and marketing.
|
| |
-
BUS 121 - Business Law I Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): ENG 100
This course is a study of legal procedures, law and society, classifications and systems of law, the tribunals administering justice and their actions, contracts, sales, transfer of titles, rights and duties of the parties, conditions and warranties.
|
| |
-
BUS 123 - Business Law II Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): BUS 121 .
This course is a study of negotiable instruments, law of property, acquisition and transfer of title, bailment, duties and liabilities of common carriers, innkeepers, warehousemen and agencies.
|
| |
-
BUS 131 - Entrepreneurial Leadership Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): ENG 100 , MAT 102 or BUS 140 .
This course is designed to provide students with the entrepreneurial leadership perspective necessary for a business owner, economic and social contexts of entrepreneurialism, traits of historically successful entrepreneurs, and analyzes the adversity of modern-day entrepreneurs.
|
| |
-
BUS 140 - Business Mathematics Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): MAT 032 , RDG 100 .
This course provides applications of business mathematics in the study of discounting, marking up, inventory, and insurance. Other topics may include payroll and commission computations, introduction to stocks and bonds, and other accepted business practices.
|
| |
-
BUS 200 - Introduction to the Business of Real Estate Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): BUS 101 .
This course is a study of the business principles, concepts, terminologies, and institutional factors related to decision making in the area of real estate.
|
| |
-
BUS 210 - Introduction to E-Commerce in Business Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): .
This course is the study of electronic commerce and the operations and applications from the business perspective. Emphasis is placed on business concepts and how they apply to the process of buying and selling goods and services online.
|
| |
-
BUS 220 - Business Ethics Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): .
This course includes an exploration of ethical issues arising in the context of doing business. Representative topics: employee rights and responsibilities, corporate regulations and rights, discrimination, truth in advertising, employee privacy, environmental exploitation and free enterprise.
|
| |
-
BUS 250 - Intro to International Business Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course provides an overview of the issues involved in doing business outside the US including business practices, culture and currency differences.
|
| |
-
BUS 268 - Special Projects in Business Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): and instructor approval.
This course includes research, reporting, and special activities for successful employment in the business world.
|
| |
-
BUS 270 - SCWE in Business Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): and instructor approval.
This course includes the integration of business skills within an approved work site related to business and industry.
|
Civil Engineering Technology |
| |
-
CET 120 - Construction Materials Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , or instructor approval.
This course includes a study of basic materials used in construction, including research of building product specifications.
|
| |
-
CET 215 - Soil Mechanics Fundamentals Lec. 2 Lab. 0 Cr. 2
Prerequisite(s): or instructor approval.
Corequisite(s): or instructor approval.
This course is an introduction to soils and their engineering properties, including classification and foundations.
|
| |
-
CET 218 - Hydraulics Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , or instructor approval.
This course includes the fundamentals of flow, control, disposal of water, and flow through open and closed conduits, orifices, and weirs.
|
| |
-
CET 230 - Construction Management Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): and or instructor approval.
This course covers the study of management of construction firms or jobs, including one or more of the following areas: bidding process, contracts, payments, job costs, labor costs, and labor relations.
|
| |
-
CET 242 - Concrete Design Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , or instructor approval.
This course covers the design of concrete structural members according to the ACI codes, quality control of concrete and structural inspection.
|
| |
-
CET 244 - Structural Steel Design Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , or , or instructor approval.
This course covers the design of beams, columns, floor framing, tension and compression members, and bolted and welded connections according to AISC specifications.
|
| |
-
CET 246 - Environmental Systems Technology Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , or instructor approval.
This course covers a study of the sources, treatment, collection and distribution of water and waste water.
|
| |
-
CET 251 - Highway Design Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
Corequisite(s): or instructor approval.
This course covers a study of the design and construction of a highway.
|
| |
-
GMT 210 - Geographic Information Systems/Data Entry/Editing Methods Lec. 4 Lab. 0 Cr. 4
Corequisite(s): and .
This course is a study of the methods of point line and area graphic data entry into digital mapping systems to include use of existing digital data sets, digitizing from existing hard copy documents, scanning and conversion from raster to vector format, coordinate geometry and input from GPS systems. Translations of graphic data from one software system to another. Techniques of adding, deleting, or modifying graphic data are also included in the course.
|
Commercial Graphics |
| |
-
CGC 110 - Electronic Publishing Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): or .
This is an introductory course to the fundamentals of electronic publishing.
|
Chemistry |
| |
-
CHM 105 - General Organic and Biochemistry Lec. 3 Lab. 3 Cr. 4
Prerequisite(s):
This course is the study of the fundamental principles of chemistry, including atomic and molecular structure, common substances and reactions, introduction to organic chemistry and biochemistry.
|
| |
-
CHM 110 - College Chemistry I Lec. 3 Lab. 3 Cr. 4
Prerequisite(s): , , , or instructor approval.
This the first course in a sequence which includes the following topics: atomic and molecular structure, nomenclature and equations, properties, reactions and states of matter, stoichiometry, gas laws, solutions and equilibria.
|
| |
-
CHM 111 - College Chemistry II Lec. 3 Lab. 3 Cr. 4
Prerequisite(s):
This course is a continuation of the study of atomic and molecular structure, nomenclature and equations, properties, reactions and states of matter, stoichiometry, gas laws, solutions, and equilibria. Other topics included are kinetics, thermodynamics, and electrochemistry.
|
College Orientation |
| |
-
COL 103 - College Skills (Non-degree credit)* Lec. 3 Lab. 0 Cr. 3
This course may include selected topics such as career planning, study skills, stress management, tutoring, group guidance and other subjects to facilitate student success.
*These credits do not apply toward graduation.
|
| |
-
COL 105 - Freshman Seminar (Non-degree credit)* Lec. 3 Lab. 0 Cr. 3
This course is a study of the purposes of higher education and provides a general orientation to the functions and resources of the college. The course is designed to help freshman adjust to the college community, develop a better understanding of the learning process, and acquire essential academic survival skills.
*These credits do not apply toward graduation.
|
Cosmetology |
| |
-
COS 101 - Fundamentals of Cosmetology Lec. 3 Lab. 0 Cr. 3
This course is an introductory course to the fundamentals of professional ethics, hygiene, good grooming and salesmanship as they relate to the practices of the salon including hair-style, type of dress and style of make-up.
|
| |
-
COS 102 - Sanitation Procedures Lec. 3 Lab. 0 Cr. 3
This course is a study of the various methods of sanitation used in the salon with emphasis on the importance of sanitation and sterilization in the practice of cosmetology.
|
| |
-
COS 106 - Facials and Make-Up Lec. 3 Lab. 0 Cr. 3
This is an introductory course to the procedures for various skin treatments, including anatomy, chemistry, and safety. Includes massage, lashes and brows.
|
| |
-
COS 108 - Nail Care Lec. 3 Lab. 0 Cr. 3
This course is a study of nail structure and manicuring techniques, including anatomy, chemistry and safety.
|
| |
-
COS 110 - Scalp and Hair Care Lec. 3 Lab. 0 Cr. 3
This course is a study of the structure and composition of hair, including the analysis and treatment of certain conditions of the hair and scalp with emphasis on preserving the health and beauty of the scalp and hair.
|
| |
-
COS 112 - Shampoo and Rinses Lec. 4 Lab. 0 Cr. 4
This course is a study of procedures and safety precautions in the application of shampoo and rinses.
|
| |
-
COS 114 - Hair Shaping Lec. 4 Lab. 0 Cr. 4
This is an introductory course to the techniques of hair shaping. Emphasis is given to the correct use and safety of implements, proper hair sectioning, and various techniques used in hair design in relationship to body structure.
|
| |
-
COS 116 - Hair Styling I Lec. 4 Lab. 0 Cr. 4
This course is a study of the fundamentals of hair design including principles, techniques, safety precautions, and chemistry. Emphasis is on hair design, curl types and the creation of special styling effects.
|
| |
-
COS 120 - Mannequin Practice Lec. 3 Lab. 0 Cr. 3
This course covers cosmetology applications including hair shaping, chemical waving, hair styling, and hair coloring.
|
| |
-
COS 201 - Salon Management Lec. 3 Lab. 0 Cr. 3
This course is a study of salon management including rules, regulations, and codes governing the practice of cosmetology. The course covers a variety of salon ownership models along with salon financial and operating characteristics.
|
| |
-
COS 206 - Chemical Hair Waving Lec. 3 Lab. 0 Cr. 3
This course is a study of methods of permanently waving the hair, including product, chemistry, and safety. It includes product classification, scalp and hair analysis and problem recognition.
|
| |
-
COS 208 - Chemical Hair Relaxing Lec. 3 Lab. 0 Cr. 3
This course is a study of methods of chemically relaxing the basic structure of hair including product, chemistry, and safety. The course emphasizes the removal of curl from overly curly hair by the use of chemical agents.
|
| |
-
COS 210 - Hair Coloring Lec. 3 Lab. 0 Cr. 3
This course is a study of the science and art of coloring the hair including methods, procedures, safety precautions, and chemistry. The course includes an introduction to chemistry as it applies to hair coloring.
|
| |
-
COS 212 - Hair Lightening Lec. 3 Lab. 0 Cr. 3
This course is a study of the lightening of hair including methods, procedures, safety precautions, chemistry, corrective measures, purpose and effects.
|
| |
-
COS 220 - Cosmetology Clinical Practice I Lec. 3 Lab. 0 Cr. 3
This course is an integration of cosmetology skills in a simulated salon environment.
|
| |
-
COS 222 - Cosmetology Clinical Practice II Lec. 3 Lab. 0 Cr. 3
This course is an integration of cosmetology skills in a simulated salon environment to provide additional practical hours in skill development.
|
Computer Technology |
| |
-
CPT 101 - Introduction to Computers Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course covers basic computer history, theory and applications, including word processing, spreadsheets, databases, and the operating system.
|
| |
-
CPT 118 - Professional Practices in Information Tech Lec. 3 Lab. 0 Cr. 3
Corequisite(s): .
This course emphasizes the development of interpersonal and technical skills required of entry-level information technology (IT) professionals. Course content includes guidance on building a career toolkit, as well as topics such as projecting a professional image, job seeking skills, ethics, and providing good customer service.
|
| |
-
CPT 168 - Programming Logic and Design Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course examines problem-solving techniques applied to program design. Topics include a variety of documentation techniques as means of solution presentation. This course also includes a general introduction to computer concepts.
|
| |
-
CPT 170 - Microcomputer Applications Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course introduces microcomputer applications software, including word processing, databases, spreadsheets, graphs, and their integration.
|
| |
-
CPT 172 - Microcomputer Database Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course introduces microcomputer database concepts, including generating reports from database, creating, maintaining, and modifying databases. Successful completion of this course prepares the student for the Access Microsoft Office Specialist Certification exam.
|
| |
-
CPT 174 - Microcomputer Spreadsheets Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course introduces the use of spreadsheet software on the microcomputer. Topics include creating, editing, using formulas, using functions, and producing graphs. Successful completion of this course prepares the student for the Access Microsoft Office Specialist Certification exam.
|
| |
-
CPT 179 - Microcomputer Word Processing Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , , or .
This course introduces microcomputer word processing. Topics include creating, editing, formatting and printing documents. Successful completion of this course prepares the student for the Access Microsoft Office Specialist Certification exam.
|
| |
-
CPT 186 - Visual Basic.net I Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , , or .
This course introduces the student to development of Visual Basic Windows applications using the Microsoft.net framework.
|
| |
-
CPT 207 - Complex Computer Applications Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course covers analyzing, designing, and implementing computerized solutions to realistic business applications areas.
|
| |
-
CPT 212 - Visual Basic Programming Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course focuses on Windows programming using Visual Basic to create graphical user interfaces. The course examines forms, controls, graphical controls, loops, control arrays, database and traditional file processing, and application class scheduling.
|
| |
-
CPT 213 - Advanced Visual Basic Programming Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course is the study of object oriented features of Visual Basic and their use in accessing databases. It includes classes, collection and web access.
|
| |
-
CPT 232 - C++ Programming I Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): as corequisite.
This introductory course in C++ Programming I emphasizes the designing, coding, testing and debugging of C ++ Programs involving input/output operations, data types, storage classes, decision structures, looping, functions, arrays, and simple pointers, and strings.
|
| |
-
CPT 233 - C++ Programming II Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): .
This course introduces object-oriented design techniques using C++. Topics include classes, friends, overloading operators, inheritance, and virtual functions.
|
| |
-
CPT 236 - Introduction to JAVA Programming Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): as corequisite.
This course is an introduction to JAVA programming. Topics will cover JAVA syntax and classes for use in the development of JAVA applications and applets.
|
| |
-
CPT 237 - Advanced JAVA Programming Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): .
This course is a study of advanced topics of the JAVA programming language by building on basic knowledge of the JAVA language. Topics covered will include multi-reading, swing classes, swing event models, advanced layout managers, the Javabean component model, and network programming and server-side programming.
|
| |
-
CPT 238 - Internet Scripting Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course is a study of Internet programming including the syntax of scripting languages and Internet programming concepts and examines topics related to client-side scripting language programming as well as introducing topics related to server-side scripting.
|
| |
-
CPT 240 - Internet Programming with Database Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course is a study of the implementation of dynamic web pages focusing on the development of web sites that interact with databases utilizing current server-side technologies along with the databases to deliver dynamic content.
|
| |
-
CPT 242 - Database Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course introduces Database models and the fundamentals of Database design. Topics include Database structure, Database processing, and application programs which access a Database.
|
| |
-
CPT 257 - Operating Systems Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): .
This course examines the theory of operating systems and how the operating systems theory is implemented in current operating systems.
|
| |
-
CPT 260 - Fundamentals of Operating Systems and Web Servers Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course is a study of operating techniques needed for setting up and maintaining web servers.
|
| |
-
CPT 264 - Systems and Procedures Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): .
This course covers the techniques of system analysis, design, development, and implementation.
|
| |
-
CPT 267 - Technical Support Concepts Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course is a study of technical support/help desk concepts and techniques for supporting computers and computer services.
|
| |
-
CPT 268 - Computer End-User Support Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course prepares students to train and support end-users. Topics include end-user support functions, developing training modules, and strategies to provide ongoing technical support. Emphasis is on solving problems with users (needs analysis, troubleshooting, and interaction with users).
|
| |
-
CPT 282 - Information Systems Security Lec. 3 Lab. 0 Cr. 1
Prerequisite(s): or instructor approval.
This course is the study of the protection of information and equipment in computer systems. Topics include all aspects of systems protection, including physical security, hardware, software and communications security. Addresses technical, legal and ethical issues.
|
Criminal Justice |
| |
-
CRJ 101 - Introduction to Criminal Justice Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): .
This course includes an overview of the functions and responsibilities of agencies involved in the administration of justice to include police organizations, court systems, correctional systems, and juvenile justice agencies.
|
| |
-
CRJ 102 - Introduction to Security Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course includes an introduction to the philosophy and application of security. The protection of personnel, facilities, and other assets as well as administrative, legal and technical problems of loss prevention and control are analyzed.
|
| |
-
CRJ 115 - Criminal Law I Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , or .
This course covers the development of criminal law in America. The basic elements of specific criminal offenses, criminal defenses, and various legal principles upon which criminal law is established are reviewed.
|
| |
-
CRJ 120 - Constitutional Law Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , , .
This course covers the analysis of the historical development of the U.S. Constitution and the relationship of rights contained therein to the state and the individual. The application of the Bill of Rights to federal and state systems is examined.
|
| |
-
CRJ 125 - Criminology Lec. 3 Lab. 0 Cr. 3
Prerequisite(s): , .
This course is a study of the various theories of criminal causation and control, the identification of criminal typologies, and the reaction of society to crime and criminals.
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
|
Print this Page